Structured Cabling & Low Voltage

The Layer Everything Else Runs On

Commercial data and voice cabling done properly — category cable drops, fiber backbone between closets, clean racks, and every run labeled and tested. Your Wi-Fi, your phones, and your network are only ever as good as the cable underneath them.

Get a Cabling Quote What We Install ↓
IDF-2 — Certification Report
A12
Category Cable — 94 ft
Labeled both ends · Mapped to port 12
● PASS
Fiber Backbone — IDF-2 to MDF
Closet to closet · Tested end to end
As-Built Documentation
Port map · Rack elevation · Handed to you
100%
Runs tested & certified
LABEL
Both ends, every drop
Category
Copper Cable
Fiber
Backbone & Riser
Tested
Every Run Certified
Labeled
And Documented
1
Vendor For Cable & IT
Why It Matters

Most “Network Problems” Are Actually Cable Problems

Before you replace a switch or argue with your ISP, it is worth knowing what is behind the wall. A surprising share of slow, flaky, intermittent network complaints trace back to cable that was rushed, mislabeled, or never tested in the first place.

Nobody Ever Tested It

Cable that was never certified can pass traffic on day one and still fail under load, at length, or on a hot afternoon. Without a test report, “it works” is a guess, not a fact.

Nothing Is Labeled

An unlabeled patch panel turns a ten-minute move into an afternoon of tracing cable with a toner. Every time. For years.

The Closet Is a Bird’s Nest

Rats’ nests hide failures, block airflow, and make every future change riskier and slower than it needs to be. Tidy is not cosmetic — it is maintainability.

What We Install

Data and Voice Cabling, Done to Standard

Commercial structured cabling for offices, clinics, hotels, warehouses, and multi-tenant space — new construction, tenant improvement, expansion, or cleaning up what somebody else left behind.

Category Cable Drops

Workstation, conference room, and wall-plate drops pulled to spec, terminated cleanly, and punched down to a labeled patch panel.

Fiber Backbone & Riser

Fiber runs between MDF and IDF closets, between floors, and building to building — terminated, tested, and documented.

Racks, Cabinets & Closets

Rack and cabinet builds, patch panels, cable management, power distribution, and a closet layout that somebody can actually work in later.

Wireless Access Point Drops

Ceiling and wall drops placed where the coverage actually needs to be, not where the cable happened to reach.

Voice & Device Cabling

Drops for desk phones, front desk equipment, time clocks, kiosks, POS lanes, and printers — planned with the rest of the network rather than bolted on after.

Testing, Labeling & As-Builts

Every run certified with a test report, labeled at both ends, and handed over with a port map and rack elevation you keep.

When You Need It

The Right Time to Pull Cable Is Before You Need It

Cable is the cheapest thing on the job while the ceiling is open, and one of the most disruptive once it is closed. These are the moments worth getting it right.

  • New construction or a new suite — cable is cheapest and easiest while the walls and ceilings are still open
  • Moving or expanding — a new space needs a real design, not a switch sitting on a filing cabinet with a cable through the ceiling tile
  • Tenant improvement or remodel — if the GC is already on site, telecom should be scoped alongside the rest of the work instead of retrofitted after the reopening
  • Wi-Fi that will not behave — more access points do not help when the ones you have are fed by bad cable in the wrong places
  • Moving to VoIP — phones over the network mean the cabling and switching carry your phone service too
  • You inherited a mess — an unlabeled, untested, undocumented closet is a slow tax on every change you will ever make
How We Work

Scoped From the Drawings, Not From a Guess

We would rather walk the space and read the plans than quote from a phone call and discover the surprises with a ladder in our hands.

01

Walk & Scope

We walk the space or read the drawings, count drops, find the pathways, and identify where the closets need to live.

02

Fixed Quote

A written scope with drop counts, cable type, and closet work priced up front — so change orders come from changes you asked for.

03

Install & Test

We pull, terminate, dress the racks, label both ends, and certify every run. Work is sequenced around your GC or your business hours.

04

Document & Hand Over

Test reports, port maps, and rack elevations handed to you — and kept on file, so the next change starts from facts.

Why Ranger IT

The People Who Pull It Are the People Who Run It

Most cabling contractors hand you a bundle of cable and drive away. We are the ones who have to live with it afterward, because we also manage the network, the switches, the Wi-Fi, and the phones that plug into it. That changes how carefully it gets done.

One Vendor, One Accountability
Cable, switching, Wi-Fi, and phones under one agreement. Nobody gets to blame the other trade.
We Work With Your GC
Scoped from drawings and sequenced around the rest of the trades, so telecom is not the thing holding up your certificate of occupancy.
Documentation You Keep
Test reports, labels, and as-builts are part of the job, not an extra you have to ask for.
Certified, Not Assumed
Every run tested to standard with a report handed over, so “it should be fine” never enters the conversation.
FAQ

Common Questions About Cabling

What building owners, GCs, and office managers ask us before a cable job.

Do you do cabling for people who are not IT clients?+
Yes. Plenty of cabling jobs start as a standalone project — a new suite, an expansion, a remodel, or cleaning up a closet somebody else left behind. There is no requirement to sign a managed IT agreement to get cable pulled. That said, the reason we are good at it is that we live with networks every day, and most cabling clients end up asking us to look after the rest.
What kind of cable will you run?+
Category cable for the copper runs and fiber for the backbone between closets. Which grade of category cable a given run calls for depends on its length, what is being fed at the end of it, and how long you intend the building to last — so we specify it during the survey based on your space rather than defaulting to whatever is easiest to sell. You will know exactly what is going in the walls, and why, before any of it does.
Can you work around our business hours?+
Yes, and for occupied space we usually have to. Retail floors, clinics, and hotels do not shut down for a cable pull, so we sequence work after hours or zone by zone. On new construction we work to the GC’s schedule.
Do we get documentation when the job is done?+
Always. Test and certification reports for every run, labels at both ends, a port map, and a rack elevation. It is part of the job, not an add-on. The point is that the next person who opens that closet — whether it is us or someone else — can work from facts.
Can you fix cabling somebody else installed?+
Often, yes. A lot of our cabling work is remediation: re-terminating bad drops, re-dressing a closet, labeling and mapping what is already there, and testing to find out which runs are actually good. Sometimes the honest answer is that a re-pull is cheaper than chasing faults, and we will say so.
Do you handle the network gear too?+
Yes. Switches, routers, Wi-Fi, firewalls, and the phone system that rides on top of it all — that is our day job. Having the same team do the cable and the equipment means there is no gap between “the cable is fine” and “the network is fine.”
Next Step

Working From Drawings, or Working Around a Mess?

Either way, send us the plans or let us walk the space. You get a written scope with drop counts and a fixed number — not a range that grows once the ladders come out.

Get a Cabling Quote (512) 601-8800